View AD8663ACPZ-REEL1_2957401.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

low noise, precision, 16 v, cmos, rail-to-rail operational amplifiers ad8663/ad8667/ad8669 rev. a information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062-9106, u.s.a. tel: 781.329.4700 www.analog.com fax: 781.461.3113 ?2007 analog devices, inc. all rights reserved. features low offset voltage: 175 v maximum @ v sy = 5 v low supply current: 275 a maximum per amplifier single-supply operation: 5 v to 16 v low noise: 23 nv/hz low input bias current: 300 fa unity-gain stable small packages available 3 mm 3 mm, 8-lead lfcsp 8-lead msop applications sensor front ends transimpedance a mps electrometer applications photodiode amplification low power adc drivers medical diagnostic instruments ph and orp meters and probes dac or ref buffers pin configurations nc 1 ? in 2 +in 3 v? 4 nc 8 v+ 7 out 6 nc 5 nc = no connect ad8663 top view (not to scale) 06742-001 nc = no connect 1 nc 2 ?in 3 +in 4 v? 7v+ 8nc 6out 5nc ad8663 06742-002 figure 1. 8-lead soic (r-8) figure 2. 8-lead lfcsp (cp-8-2) out a 1 ?in a 2 +in a 3 v? 4 v+ 8 out b 7 ?in b 6 +in b 5 06742-003 ad8667 top view (not to scale) out a 1 ? in a 2 +in a 3 v+ 4 out d 14 ? in d 13 +in d 12 v ? 11 +in b 5 +in c 10 ? in b 6 ? in c 9 out b 7 out c 8 ad8648 top view (not to scale) 1 2 3 4 14 13 12 11 5 10 6 9 7 8 ad8669 top view (not to scale) 0 6742-004 figure 3. 8-lead msop (rm-8), 8-lead soic (r-8) figure 4. 14-lead soic (r-14) general description the ad866x are rail-to-rail output amplifiers that use the analog devices, inc., patented digitrim? trimming technique to achieve low offset voltage. the ad866x feature an extended operating range with supply voltages up to 16 v. they also feature low input bias current, low input offset voltage, and low current noise. the combination of low offset, very low input bias current, and a wide supply range makes these amplifiers useful in a wide variety of applications usually associated with higher priced jfet amplifiers. systems using high impedance sensors, such as photodiodes, benefit from the combination of low input bias current, low noise, low offset, and wide bandwidth. the ability to operate the device for single (5 v to 16 v) or dual supplies (2.5 v to 8 v) supports many applications. the rail- to-rail outputs provide increased dynamic range to drive low frequency data converters. the low bias current drift is well suited for precision i-to-v converters. the combination of precision offset, offset drift, and low noise also make the op amps ideal for gain, dc offset adjust, and active filter in both instrumentation and medical applications. these low power op amps can be used in ir thermometers, ph and orp instru- ments, pressure transducer front ends, and other sensor signal conditioning circuits that are used in remote or wireless applications. the ad8663/ad8667/ad8669 are specified over the extended industrial temperature range of ?40c to +125c. the single ad8663 is available in a narrow 8-lead soic package and a very thin, 8-lead lfcsp. the dual ad8667 is available in a narrow 8-lead soic package and an 8-lead msop. the quad ad8669 is available in a 14-lead soic package.
ad8663/ad8667/ad8669 rev. a | page 2 of 16 table of contents features .............................................................................................. 1 applications....................................................................................... 1 pin configurations ........................................................................... 1 general description ......................................................................... 1 revision history ............................................................................... 2 specifications..................................................................................... 3 ad8663/ad8667/ad8669 electrical characteristics............. 3 absolute maximum ratings ............................................................5 thermal resistance .......................................................................5 esd caution...................................................................................5 typical performance characteristics ..............................................6 outline dimensions ....................................................................... 13 ordering guide .......................................................................... 15 revision history 10/07rev. 0 to rev. a added ad8667 and ad8669 ............................................universal changes to features.......................................................................... 1 changes to general description .................................................... 1 inserted figure 3 and figure 4 ........................................................ 1 changes to table 1, power supply section.................................... 3 changes to table 2............................................................................ 4 reformatted typical performance characteristics section ........ 6 changes to figure 5.......................................................................... 6 changes to figure 13........................................................................ 7 changes to figure 17 and figure 20............................................... 8 inserted figure 35 through figure 39......................................... 11 inserted figure 40 and figure 41.................................................. 12 updated outline dimensions ....................................................... 13 changes to ordering guide .......................................................... 15 7/07revision 0: initial version
ad8663/ad8667/ad8669 rev. a | page 3 of 16 specifications ad8663/ad8667/ad8669 electrical characteristics v sy = 5.0 v, v cm = v sy /2, t a = 25c, unless otherwise noted. table 1. parameter symbol conditions min typ max unit input characteristics offset voltage v os v cm = v sy /2 30 175 v ?40c < t a < +125c 450 v input bias current i b 0.3 pa ?40c < t a < +85c 45 pa ?40c < t a < +125c 105 pa input offset current i os 0.2 pa ?40c < t a < +85c 35 pa ?40c < t a < +125c 65 pa input voltage range 0.2 3.0 v common-mode rejection ratio cmrr v cm = 0.2 v to 3.0 v 76 100 db ?40c < t a < +125c 76 100 db large signal voltage gain a vo r l = 100 k, v out = 0.5 v to 4.5 v 115 140 db r l = 2 k, v out = 0.5 v to 4.5 v 106 114 db offset voltage drift tcv os ?40c < t a < +125c 1.5 5 v/c output characteristics output voltage high v oh i l = 100 a 4.95 4.97 v ?40c < t a < +125c 4.90 v output voltage high v oh i l = 1 ma 4.65 4.80 v ?40c < t a < +125c 4.60 v output voltage low v ol i l = 100 a 17 25 mv ?40c < t a < +125c 35 mv output voltage low v ol i l = 1 ma 150 200 mv ?40c < t a < +125c 250 mv short-circuit current i sc 7 ma closed-loop output impedance z out f = 100 khz, a v = 1 120 power supply power supply rejection ratio psrr v sy = 5 v to 16 v 95 105 db ?40c < t a < +125c 95 db supply current per amplifier i sy v out = v sy /2 210 275 a ?40c < t a < +125c 325 a dynamic performance slew rate sr r l = 2 k 0.26 v/s gain bandwidth product gbp c l = 20 pf 520 khz phase margin m c l = 20 pf 60 degrees noise performance peak-to-peak noise e n p-p f = 0.1 hz to 10 hz 2.5 v p-p voltage noise density e n f = 1 khz 23 nv/hz f = 10 khz 21 nv/hz current noise density i n f = 1 khz 0.05 pa/hz
ad8663/ad8667/ad8669 rev. a | page 4 of 16 v sy = 16.0 v, v cm = v sy /2, t a = 25c, unless otherwise noted. table 2. parameter symbol conditions min typ max unit input characteristics offset voltage v os v cm = v sy /2 40 300 v ?40c < t a < +125c 500 v input bias current i b 0.3 pa ?40c < t a < +85c 45 pa ?40c < t a < +125c 120 pa input offset current i os 0.2 pa ?40c < t a < +85c 35 pa ?40c < t a < +125c 65 pa input voltage range 0.2 14.5 v common-mode rejection ratio cmrr v cm = 0.2 v to 14.5 v 87 109 db ?40c < t a < +125c 87 109 db large signal voltage gain a vo r l = 100 k, v out = 0.5 v to 15.5 v 115 140 db r l = 2 k, v out = 0.5 v to 15.5 v 106 111 db offset voltage drift tcv os ?40c < t a < +125c 1.5 5 v/c output characteristics output voltage high v oh i l = 100 a 15.95 15.98 v ?40c < t a < +125c 15.90 v output voltage high v oh i l = 1 ma 15.85 15.92 v ?40c < t a < +125c 15.80 v output voltage low v ol i l = 100 a 17 25 mv ?40c < t a < +125c 35 mv output voltage low v ol i l = 1 ma 70 100 mv ?40c < t a < +125c 125 mv short-circuit current i sc 50 ma closed-loop output impedance z out f = 100 khz, a v = 1 100 power supply power supply rejection ratio psrr v sy = 5 v to 16 v 95 105 db ?40c < t a < +125c 95 db supply current per amplifier i sy v out = v sy /2 230 285 a ?40c < t a < +125c 355 a dynamic performance slew rate sr r l = 2 k 0.3 v/s gain bandwidth product gbp c l = 20 pf 540 khz phase margin m c l = 20 pf 64 degrees noise performance peak-to-peak noise e n p-p f = 0.1 hz to 10 hz 2.5 v p-p voltage noise density e n f = 1 khz 23 nv/hz f = 10 khz 21 nv/hz current noise density i n f = 1 khz 0.05 pa/hz
ad8663/ad8667/ad8669 rev. a | page 5 of 16 absolute maximum ratings table 3. parameter rating supply voltage 18 v input voltage ?0.1 v to v sy differential input voltage 18 v output short-circuit duration to gnd indefinite storage temperature range ?60c to +150c operating temperature range ?40c to +125c junction temperature range ?65c to +150c lead temperature, soldering (60 sec) 300c stresses above those listed under absolute maximum ratings may cause permanent damage to the device. this is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. thermal resistance ja is specified for the worst-case conditions, that is, a device soldered in a circuit board for surface-mount packages. table 4. thermal resistance package type ja jc unit 8-lead soic (r-8) 121 43 c/w 8-lead lfcsp (cp-8-2) 75 1 18 1 c/w 8-lead msop (rm-8) 145 45 c/w 14-lead soic (r-14) 90 45 c/w 1 exposed pad soldered to application board. esd caution
ad8663/ad8667/ad8669 rev. a | page 6 of 16 typical performance characteristics 1600 1400 1200 1000 800 600 400 200 0 0 50 100 150 200 250 ?50?100 ?150 ?200 ?250 number of amplifiers 06742-005 v os (v) v sy = 5v ?0.1v < v cm <+3.5v t a = 25c figure 5. input offset voltage distribution 40 35 30 25 20 15 10 5 0 number of amplifiers 012345 tcv os (v) 06742-006 v sy = 2.5v ?40c < t a < +125c figure 6. offset voltage drift distribution 500 ?500 05 . 0 v cm (v) v os (v) 400 300 200 100 0 ?100 ?200 ?300 ?400 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 v sy = 5v t a = 25c 06742-007 figure 7. input offset voltage vs. common-mode voltage 10000 9000 8000 7000 6000 5000 4000 3000 2000 1000 0 50 100 150 200 250 ?50?100 ?150 ?200 ?250 number of samples 06742-037 v os (v) 0 v sy = 16v ?0.1v < v cm < +14v t a = 25c figure 8. input offset voltage distribution 40 35 30 25 20 15 10 5 0 5 4 3 2 1 0 number of amplitudes 06742-038 tcv os (v/c) v sy = 8v ?40c < t a < +125c figure 9. offset voltage drift distribution 300 ?200 ?250 ?300 01 6 v cm (v) v os (v) 250 200 150 100 50 0 ?50 ?100 ?150 2 4 6 8 10 12 14 06742-010 v sy = 16v t a = 25c figure 10. input offset voltage vs. common-mode voltage
ad8663/ad8667/ad8669 rev. a | page 7 of 16 100 0 0.5 4.5 v cm (v) i b (pa) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 80 60 40 20 06742-013 v sy = 5v t a = 125c figure 11. input bias current vs. common-mode voltage at 125c 100 100 frequency (hz) cmrr (db) 1k 10k 100k 1m 10m 90 80 70 60 50 40 30 20 06742-023 v sy = 5v t a = 25c figure 12. cmrr vs. frequency, v sy = 5 v 10000 0.1 0.001 10 load current (ma) output saturation voltage (mv) 0.01 0.1 1 1 10 100 1000 v ol sinking v sy = 5v t a = 25c 06742-011 v sy ? v oh sourcing figure 13. output swing saturation voltage vs. load current 100 0.5 v cm (v) i b (pa) 2.5 4.5 6.5 8.5 10.5 12.5 14.5 80 60 40 20 0 06742-016 v sy = 16v t a = 125c figure 14. input bias current vs. common-mode voltage at 125c 100 100 frequency (hz) cmrr (db) 1k 10k 100k 1m 10m 90 80 70 60 50 40 30 20 06742-039 v sy = 16v t a = 25c figure 15. cmrr vs. frequency, v sy = 16 v 10000 0.1 0.001 100 load current (ma) output saturation voltage (mv) 1 10 100 1000 0.01 0.1 1 10 v sy = 16v t a = 25c v ol sinking v sy ? v oh sourcing 06742-014 figure 16. output swing saturation voltage vs. load current
ad8663/ad8667/ad8669 rev. a | page 8 of 16 350 ?40 temperature (c) drop out voltage (mv) ?25 ?10 5 20 35 50 65 80 95 110 125 300 250 200 150 100 50 0 06742-044 v sy ? v oh @ 100a v sy ? v oh @ 1ma v ol @ 100a v ol @ 1ma figure 17. output voltage saturation vs. temperature 120 ?80 100 10m frequency (hz) gain (db) and phase (degrees) 1k 10k 100k 1m 100 80 60 40 20 0 ?20 ?40 ?60 phase gain c l = 0pf c l = 200pf v sy = 5v t a = 25c 06742-017 figure 18. open-loop gain and phase shift vs. frequency 60 ?40 100 10m frequency (hz) a cl (db) 1k 10k 100k 1m 40 20 0 ?20 g = 1 g = 10 g = 100 v sy = 5v t a = 25c 06742-018 figure 19. closed-loop gain vs. frequency 140 ?40 temperature (c) drop out voltage (mv) ?25 ?10 5 20 35 50 65 80 95 110 125 120 100 80 60 40 20 0 06742-045 v sy ? v oh @ 100a v sy ? v oh @ 1ma v ol @ 100a v ol @ 1ma figure 20. output voltage saturation vs. temperature 120 ?80 100 10m frequency (hz) gain (db) and phase (degrees) 1k 10k 100k 1m 100 80 60 40 20 0 ?20 ?40 ?60 v sy = 16v t a = 25c phase gain c l = 0pf c l = 200pf 06742-020 figure 21. open-loop gain and phase shift vs. frequency 60 ?40 100 10m frequency (hz) a cl (db) 1k 10k 100k 1m 40 20 0 ?20 g = 1 g = 10 g = 100 v sy = 16v t a = 25c 06742-021 figure 22. closed-loop gain vs. frequency, v sy = 16 v
ad8663/ad8667/ad8669 rev. a | page 9 of 16 1000 100 frequency (hz) z out ( ? ) 1k 10k 100k 1m 10m 100 10 1 0.1 06742-040 v sy = 5v t a = 25c g = ?100 g = ?10 g = 1 figure 23. closed-loop output impedance vs. frequency, v sy = 5 v 100 frequency (hz) psrr (db) 1k 10k 100k 1m 10m 90 80 70 60 50 40 30 20 10 0 ?10 ?20 06742-024 v sy = 5v t a = 25c pssr+ pssr? figure 24. psrr vs. frequency, v sy = 5 v 10 capacitance (pf) overshoot (%) 100 1k 80 70 60 50 40 30 20 10 0 06742-025 v sy = 5v t a = 25c os+ os? figure 25. small-signal overshoot vs. load capacitance, v sy = 5 v 1000 100 frequency (hz) z out ( ? ) 1k 10k 100k 1m 10m 100 10 1 0.1 06742-041 v sy = 16v t a = 25c g = ?100 g = ?10 g = 1 figure 26. closed-loop output impedance vs. frequency, v sy = 16 v 100 frequency (hz) psrr (db) 1k 10k 100k 1m 10m 90 80 70 60 50 40 30 20 10 0 ?10 ?20 06742-027 v sy = 16v t a = 25c pssr+ pssr? figure 27. psrr vs. frequency, v sy = 16 v 10 capacitance (pf) overshoot (%) 100 1k 80 70 60 50 40 30 20 10 0 06742-028 v sy = 16v t a = 25c os+ os? figure 28. small-signal overshoot vs. load capacitance, v sy = 16 v
ad8663/ad8667/ad8669 rev. a | page 10 of 16 06742-029 v sy = 2.5v a v = 1 c l = 200pf r l = 2k ? time (10s/div) voltage (200mv/div) figure 29. large signal transient response, v sy = 2.5 v 06742-030 v sy = 2.5v a v = 1 c l = 200pf r l = 10k ? time (2s/div) voltage (50mv/div) figure 30. small signal transient response, v sy = 2.5 v 300 0 v sy (v) i sy (a) 2 4 6 8 10 12 14 16 250 200 150 100 50 0 06742-042 t a = +125c t a = +85c t a = +25c t a = ?40c figure 31. supply current vs. supply voltage ad8663 06742-032 v sy = 8v a v = 1 c l = 200pf r l = 2k ? time (20s/div) voltage (2v/div) figure 32. large signal transient response, v sy = 8 v 06742-033 v sy = 8v a v = 1 c l = 200pf r l = 10k ? time (2s/div) voltage (50mv/div) figure 33. small signal transient response, v sy = 8 v 1200 0 v sy (v) i sy (a) 2 4 6 8 10 12 14 16 1000 800 600 400 200 0 06742-043 t a = +125c t a = +85c t a = +25c t a = ?40c figure 34. supply current vs. supply voltage ad8669
ad8663/ad8667/ad8669 rev. a | page 11 of 16 +125c ?40c +25c +85c 0 550 500 450 400 50 100 150 200 250 300 350 600 i sy (a) 0 2 4 6 8 10121416 v sy (v) 06742-031 figure 35. supply current vs. supply voltage ad8667 06742-049 v sy = 2.5v a v = ?100 t a = 25c time (20s/div) input voltage (50mv/div) output voltage (1v/div) 0.15 0.10 0.05 0 ?0.05 ?0.10 ?0.15 ?0.20 ?0.25 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 ?0.5 ?1.0 ?1.5 ?2.0 ?2.5 ?3.0 ?3.5 input voltage output voltage figure 36. positive overload recovery 06742-050 v sy = 2.5v a v = ?100 t a = 25c time (20s/div) input voltage (50mv/div) output voltage (1v/div) 0.05 0 ?0.05 ?0.10 ?0.15 ?0.20 ?0.25 ?0.30 ?0.35 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 ?0.5 ?1.0 input voltage output voltage figure 37. negative overload recovery 1000 1 1 10000 frequency (hz) e n (nv/ hz) 10 100 1000 10 100 v sy = 2.5v and 8v t a = 25c 06742-034 figure 38. voltage noise density 06742-046 v sy = 8v a v = ?100 t a = 25c time (20s/div) input voltage (50mv/div) output voltage (5v/div) 0.15 0.10 0.05 0 ?0.05 ?0.10 ?0.15 ?0.20 ?0.25 27 22 17 12 7 2 ?3 ?8 ?13 input voltage output voltage figure 39. positive overload recovery 06742-048 v sy = 8v a v = ?100 t a = 25c time (20s/div) input voltage (50mv/div) output voltage (5v/div) 0.05 0 ?0.05 ?0.10 ?0.15 ?0.20 ?0.25 ?0.30 ?0.35 35 30 25 20 15 10 5 0 ?5 input voltage output voltage figure 40. negative overload recovery
ad8663/ad8667/ad8669 rev. a | page 12 of 16 06742-051 0 ?20 ?40 ?60 ?80 ?100 ?120 ?140 ?160 channel separation (db) 100 1k 10k 100k frequency (hz) v sy = 2.5v t a = 25c 20k ? 2k? 06742-047 0 ?20 ?40 ?60 ?80 ?100 ?120 ?140 ?160 channel separation (db) 100 1k 10k 100k frequency (hz) v sy = 8v t a = 25c 20k? 2k ? figure 41. channel separation vs. frequency figure 42. channel separation vs. frequency
ad8663/ad8667/ad8669 rev. a | page 13 of 16 outline dimensions controlling dimensions are in millimeters; inch dimensions (in parentheses) are rounded-off millimeter equivalents for reference only and are not appropriate for use in design. compliant to jedec standards ms-012-a a 012407-a 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) 0.50 (0.0196) 0.25 (0.0099) 45 8 0 1.75 (0.0688) 1.35 (0.0532) seating plane 0.25 (0.0098) 0.10 (0.0040) 4 1 85 5.00 (0.1968) 4.80 (0.1890) 4.00 (0.1574) 3.80 (0.1497) 1.27 (0.0500) bsc 6.20 (0.2441) 5.80 (0.2284) 0.51 (0.0201) 0.31 (0.0122) coplanarity 0.10 figure 43. 8-lead small outline package [soic_n] narrow body (r-8) dimensions shown in millimeters and (inches) 0 61507-b 1 exposed pa d (bottom view) 0.50 bsc pin 1 indicator 0.50 0.40 0.30 top view 12 max 0.70 max 0.65 typ 0.90 max 0.85 nom 0.05 max 0.01 nom 0.20 ref 1.89 1.74 1.59 4 1.60 1.45 1.30 3.25 3.00 sq 2.75 2.95 2.75 sq 2.55 5 8 pin 1 indicator seating plane 0.30 0.23 0.18 0.60 max 0.60 max figure 44. 8-lead lead frame chip scale package [lfcsp_vd] 3 mm 3 mm body, very thin, dual lead (cp-8-2) dimensions shown in millimeters
ad8663/ad8667/ad8669 rev. a | page 14 of 16 compliant to jedec standards mo-187-aa 0.80 0.60 0.40 8 0 4 8 1 5 pin 1 0.65 bsc seating plane 0.38 0.22 1.10 max 3.20 3.00 2.80 coplanarity 0.10 0.23 0.08 3.20 3.00 2.80 5.15 4.90 4.65 0.15 0.00 0.95 0.85 0.75 figure 45. 8-lead mini small outline package [msop] (rm-8) dimensions shown in millimeters controlling dimensions are in millimeters; inch dimensions (in parentheses) are rounded-off millimeter equivalents for reference only and are not appropriate for use in design. compliant to jedec standards ms-012-ab 060606-a 14 8 7 1 6.20 (0.2441) 5.80 (0.2283) 4.00 (0.1575) 3.80 (0.1496) 8.75 (0.3445) 8.55 (0.3366) 1.27 (0.0500) bsc seating plane 0.25 (0.0098) 0.10 (0.0039) 0.51 (0.0201) 0.31 (0.0122) 1.75 (0.0689) 1.35 (0.0531) 0.50 (0.0197) 0.25 (0.0098) 1.27 (0.0500) 0.40 (0.0157) 0.25 (0.0098) 0.17 (0.0067) coplanarity 0.10 8 0 45 figure 46. 14-lead small ou tline package [soic_n] narrow body (r-14) dimensions shown in millimeters
ad8663/ad8667/ad8669 rev. a | page 15 of 16 ordering guide model temperature range package description package option branding ad8663arz 1 ?40c to +125c 8-lead soic_n r-8 ad8663arz-reel 1 ?40c to +125c 8-lead soic_n r-8 ad8663arz-reel7 1 ?40c to +125c 8-lead soic_n r-8 ad8663acpz-r2 1 ?40c to +125c 8-lead lfcsp_vd cp-8-2 a1u ad8663acpz-reel 1 ?40c to +125c 8-lead lfcsp_vd cp-8-2 a1u ad8663acpz-reel7 1 ?40c to +125c 8-lead lfcsp_vd cp-8-2 a1u ad8667arz 1 ?40c to +125c 8-lead msop r-8 ad8667arz-reel 1 ?40c to +125c 8-lead msop r-8 ad8667arz-reel7 1 ?40c to +125c 8-lead msop r-8 ad8667armz-r2 1 ?40c to +125c 8-lead msop rm-8 a1e ad8667armz-reel 1 ?40c to +125c 8-lead msop rm-8 a1e ad8669arz 1 ?40c to +125c 14-lead soic_n r-14 ad8669arz-reel 1 ?40c to +125c 14-lead soic_n r-14 ad8669arz-reel7 1 ?40c to +125c 14-lead soic_n r-14 1 z = rohs compliant part.
ad8663/ad8667/ad8669 rev. a | page 16 of 16 notes ?2007 analog devices, inc. all rights reserved. trademarks and registered trademarks are the property of their respective owners. d06742-0-10/07(a)

▲Up To Search▲

Price & Availability of AD8663ACPZ-REEL1

	To Download AD8663ACPZ-REEL1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .